Sunday, December 1, 2019

2010 Cadillac Truck Escalade AWD V8-6.2L Page 567

2010 Cadillac Truck Escalade AWD V8-6.2L Page 567

Circuit/System Description

The driver and front passenger seat heating elements are controlled by a common high current relay internal to the memory seat module (MSM) and

the low side by individual element control circuits. The MSM connects the heated seat heater element supply voltage circuits for both seats to a

common reference point. This reference point is biased to approximately 2.5 V. Before the MSM will allow heated seat operation, it checks to see if

this reference voltage is shorted to ground or battery voltage. Once the module verifies that it is not closing to a shorted heating element, it allows

heated seat operation. After which it continues to monitor for a shorted circuit.

Conditions for Running the DTC

The MSM must be powered.

Conditions for Setting the DTC

B2345 00

After a heated seat is activated, the MSM detects a shorted circuit on the seat heating element supply voltage circuit or control circuit.

No comments:

Post a Comment