Wednesday, January 15, 2020

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 331

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 331



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)



Description and Operation



Steering Wheel and Column Description and Operation (See: Steering and Suspension/Steering/Steering Column/Description and Operation)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit



Testing/Circuit Testing)



* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic



Procedures/Connector Repairs/Connector Repairs)



* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General



Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)



* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring



Repairs/Wiring Repairs)



Scan Tool Reference



Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information



Circuit/System Verification



Clear all DTCs and operate the steering column lock within the conditions for running the DTC. The DTC should not set.



If the DTC sets, replace the K60 Steering Column Lock Control Module or the K9 Body Control Module.



Repair Instructions



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



* Steering Column Lock Control Module Replacement (ULS) (See: Steering and Suspension/Steering/Steering Column/Steering Column



Lock/Service and Repair)



* Body Control Module Replacement (See: Body and Frame/Body Control Systems/Body Control Module/Service and Repair/Body Control



Module Replacement)



* Control Module References (See: Testing and Inspection/Programming and Relearning) for steering column lock control module/body



control module replacement, setup and programming



B310D



DTC B310D-B310F



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions)provides an overview of each diagnostic category.



DTC Descriptors



DTC B310D 00



- Keyless Entry Transmitter 6 Battery



DTC B310E 00



- Keyless Entry Transmitter 7 Battery



DTC B310F 00



- Keyless Entry Transmitter 8 Battery



Circuit/System Description



With each press of a keyless entry transmitter button, a message containing the current battery state of the transmitter is sent to the remote control



door lock receiver, along with the commanded keyless entry function. The remote control door lock receiver sends this to the body control module



(BCM) to perform the requested function.



Conditions for Running the DTC

No comments:

Post a Comment